Introduction
POWER BOUSEI EP039 is a paint with outstanding working ability, strong anti-corrosion, super thick film and prevents all rust.
POWER BOUSEI EP039 is a high solid epoxy primer that can build dry film thickness over 75u per coat for excellent resistance to friction, chemicals and moisture. EP039 is a 2-component modified polyamide epoxy primer that allows for a long recoating time up to 30 days. EP039 prevents rust and corrosion on steel, galvanized steel (both cold and hot dip), non-ferrous metals, and concrete. Furthermore, EP039 prevents concrete deterioration. EP039 is a high performance primer that is effective, economical and easy to use.
Remarkable characteristics
- Thick coat up to 75u dry film thickness per coat;
- Cost down due to just one coating;
- Very simple. Minimum surface preparation;
- Compatible with many topcoats;
- For various surfaces including steel, galvanized steel (both cold and hot dip), non-ferrous metals, concrete, etc.;
- Easy 1:1 mix ratio;
- Excellent chemicals resistance and resistance to friction and moisture;
- Effectively stops rust in progress.
Technical parameters
Direction for use
Step 1. Remove loose rust with a common tool such as a hammer. Then perform minimum surface preparation (SSPC-SP-2) with sandpaper or wire brush.
Step 2. Remove surface of all contaminants including dirt, chemicals, oil, grease, seawater, alkalis and acids. Rinse thoroughly with fresh water. Allow to dry completely.
Step 3. Thoroughly mix base component. Then, mix activatior thoroghly.
Step 4. Mix base component and activator at 1:1 ratio. Thoroughly mix for 3 to 5 minutes.
Step 5. After using, wash equipment and containers with reducer or thinner.
Notes:
- Exposure to sunlight and the elements can cause fading, yellowing and chalking. But the corrosion resistance will not be adversely affected.
- Beware of low curing temperatures and condensation on the film while curing because they can cause blushing.
Tiếng Việt
日本語