The best way to control oil contamination and limit hydraulic machine failure is to use a suitable filter. The CAN-DO oil cleaner system is the product you are looking for to solve this problem.

Studies have shown that almost 100% of hydraulic engine failures can be avoided by keeping the oil contamination levels below NAS9. If the oil contamination is at NAS12, the engine failure rate can exceed 45%. Although other solutions are taken to prevent foreign matter from entering the oil, a CAN-DO Oil Cleaner Device is still necessary to remove impurities and water mixed in the hydraulic oil.

Figure 1: Graph depicting the correlation between the % chance of engine failure and the degree of oil contamination (According to the NAS classification)

The CAN-DO Oil Cleaner device is made from a paper core made from specialized cellulose pulp, and the fibers in the pulp will absorb impurities and water. The CAN-DO Oil Cleaner helps to filter out and retain deposits by changing their shape, thus making the most of the oil pressure.

Characteristics:

• Constructed with lid and PP film to prevent spills and achieve high cleaning efficiency
• Easy to disassemble
• Capable of effectively removing contaminants, helping to increase engine life
• Easy to burn, no harm to the environment

The CAN-DO Hydraulic Oil Cleaner Device can filter oil contaminated with NAS12 level, dirt concentration of 0.1% to NAS6 level, and 0.01% of the dirt. From there, it brings benefits to the engine:

• Smooth operation
• Increase hydraulic engine life
• Simplify oil maintenance
• Reduce impact on the environment
• Reduce power consumption
• Eliminate/Reduce problems such as equipment failure, engine failure, downtime, etc.

OFF-LINE method (Integrated pump and motor)

CM series: Compact design, can be installed on the machine or on the floor. There are three models: CM50, CM80, and CM100.

CS series: Larger capacity than CM series, can be installed on the machine or on the floor. They have the function of filtering oil for a relatively long time. The CS series offers three models: CS200, CS400, and CS600.

CD series: Portable series suitable for short-time filtration and with exhaust systems.

IN-LINE method (Byline)

CF series: Installed directly on the hydraulic system, continuously filtering oil while the system is operating. With two main model lines: CF50 and CF200.

CM250 series: Suitable for use in machines with high viscosity or highly contaminated oils such as gear, cutting, and heat treatment. With the CM250, CM501, and CM502 series.